Overview
The Model 5414 Mic/Line Input & Line Output Interface is a high-performance audio input/output unit that utilizes the Dante Audio-over-Ethernet media networking technology. Four mic/line inputs on front panel with adjustable gain, P48 phantom power, high-pass filtering, and level metering. Four balanced line-level analog outputs on back panel. Flexible headphone monitor section allows single or dual-channel source selection, level meters, and 1/4-inch jacks on the front and back panels. Mounts in one space (1U) of a 19-inch rack and is powered by 100-240 V, 50/60 Hz.

Specifications
Network Audio Technology: Type: Dante Audio-over-Ethernet Bit Depth: 24 Sample Rate: 48 kHz Number of Transmitter (Output) Channels: 4 Number of Receiver (Input) Channels: 4 Dante Audio Flows: 4; 2 transmitter, 2 receiver Network Interface: Type: twisted-pair Ethernet, with Power-over-Ethernet (PoE) support Data Rate: 100 Mb/s (10 Mb/s Ethernet not supported) Mic/Line Inputs: 4 Type: electronically balanced Input Impedance: 3.7 k ohms Compatibility: dynamic, ribbon, or phantom-powered mics Phantom Power: P48 per IEC 61938 standard, +45 volts DC nominal, on/off selectable per channel High-Pass Filter: –6 dB at 75 Hz, 18 dB per octave, selectable per channel Input Gain: 0 dB (line), 10 dB, 19-70 dB in 3-dB steps EIN: –123 dBu, 22 kHz bandwidth, 70 dB gain, 150 ohm source resistance Dynamic Range: greater than 116 dB, 0 dB gain, A-weighted Distortion (THD+N): less than 0.001% (–101 dB) at –1 dBFS, 40 dB gain, 22 kHz bandwidth Frequency Response: +0.0/–0.5 dB, 22 Hz to 22 kHz Max Input: +24 dBu with 0 dB gain selected for 0 dBFS Meters: 4, one 8-segment LED per input		Line Outputs: 4 Dynamic Range: greater than 119 dB, A-weighted Distortion (THD+N): 0.0012% (–99 dB) at –1 dBFS, 22 kHz bandwidth Frequency Response: 20-20 kHz, ±0.1 dB Max Level: +24dBu at 0 dBFS Input & Output Monitor: Source: mic/line inputs or line outputs Mode: stereo or mono Meters: 2, 8-segment LED Connectors: Mic/Line Inputs: 3-pin female XLR Line Outputs: 3-pin male XLR Headphone Output: ¼-inch 3-conductor jacks Ethernet: Neutrik etherCON RJ45 USB: type A receptacle AC Mains: Requirement: 100 to 240 V, +10/–15%, 50/60 Hz, 15 W maximum Connector: 3-blade, IEC 320 C14-compatible (mates with IEC 320 C13) Dimensions (Overall): 19.0 inches wide (48.3 cm) 1.72 inches high (4.4 cm) 9.2 inches deep (23.4 cm) Mounting: one space (1U) in a standard 19-inch rack Weight: 3.5 pounds (1.6 kg) Specifications subject to change without notice.

STUDIO TECHNOLOGIES Model 5414 Mic/Line Input &amp; Line Output Interface

STUDIO TECHNOLOGIES Model 5414 Mic/Line Input & Line Output Interface